Straightpoint Calibration Verification Tool for Colt Tensionmeter

In order to ensure the COLTS accuracy a calibration verification rod is specifically designed to check the tensiometer calibration accuracy. The calibration verification checking process is quick and simple. Open the COLT app on your smart mobile device, connect to the COLT device via Bluetooth, and select ‘Cal Check’ within the ‘Rope’ menu section of the app. Place COLT on a flat surface and then zero the measurement on screen. Place the 20-inch steel rod in the center of all 3 sheaves and apply the loading arm until it is fully engaged with the magnetic catch. The force measurement reading should read as 3000lbs (within an accuracy range of <3%>).

If the measurement is greater than a 3% difference (above 3090lbs or below 2910lbs) then you will need to contact SP and arrange for the COLT to be sent back to SP for recalibration. The process is as simple as that!

Features:

• Easy verification for the Straightpoint COLT Tension Meter
• Verify within an accuracy range of 3%
• Simple to verify with the Straightpoint App