Nite Ize CamJam XT Aluminum Rope Tightener - Large

Features:

• Tighten, tension, connect and secure heavy loads by simply pulling the rope or cord
• Easy to adjust and release by rotating the cam lock lever
• Maintain high tension without the use of knots
• Can be used in a loop or fixed end system
• Small and lightweight

The Nite Ize CamJam XT Aluminum Rope Tightener - Large features a carabiner clip and gate on one end and a cam mechanism on the other. It is easily adjusted and re-adjusted on the fly and allows for ultimate versatility when knots just won't cut it.

To use the Fixed End System: simply anchor the carabiner to any hook, D-ring, or loop, and feed the cord or rope through the cam until you've reached the desired level of tension. Next, pull the cord firmly and the cam locks into place and stays that way until you release it.

To use the Loop System: Tie a knot to create a loop in one end of your rope or cord. Clip the CamJam XT into that loop, then pull the other end or rope through the cam mechanism. This loop system enables you to bundle or wrap heavy loads and easily secure them.

To Release the Cam: simply rotate the cam lock lever and pull your rope or cord upward.

WARNING: NOT FOR USE WHERE DISENGAGEMENT COULD RESULT IN BODILY INJURY OR PROPERTY DAMAGE NOT FOR CLIMBING.