Miller BackBiter Tie-Back Twin Leg Lanyard
Miller BackBiter offers the ultimate in tie-back safety! The webbing and snap hooks of regular lanyards are not designed to withstand the rigors of tying back. The innovative Miller BackBiter Tie-Back Lanyard with a Miller 5K® Snap Hook was designed from top to bottom for tie-back use.
Materials:
- Webbing: 1-3/8 in. (35mm) Green or Blue Polyester
- SofStop Shock Absorber
- - Webbing: Polyester
- - Safety Strap (Inside SofStop): 1 ¾ in. (45mm) Polyester
- Locking Snap Hook: Steel, 3/4” (19mm) gate opening
- Miller 5K Locking Snap Hook: Steel, 5/8” (16mm) gate opening
- Thread: Six cord bonded, three strand polyester thread
- Labels: Valeron
- All hardware meets ASTM (50) fifty-hour salt spray test requirements
Certification:
- OSHA 1910.66, 1926.104, 1926.502;
- ANSI A10.32, Z359.13; CSA Z259.11 Class E4 (models with “C” in part number),
- CSA Z259.11 Class E6 (models with “E6” in part number)
Technical:
- Length: 6'
- Minimum Tensile
- - Lanyard Webbing: 12,000 lbs (53.4kN)
- - SofStop Safety Strap Webbing (inside the SofStop): 5,000 lbs (22kN)
- - Snap Hook: 5,000 lbs (22kN)
- - Thread: 42lbs (0.18kN)
