GME Supply is North America's Premier Outfitter of fall protection, safety equipment, and gear for at-height workers, industry, and construction.

1391 E Boone Industrial Blvd
Columbia, MO 65202
(718) 210-3913

Home > GMP J2 Cable Lasher Without Strand Lock

Model#: 86074

Stock#: GMP-86074

 

GMP J2 Cable Lasher Without Strand Lock

GMP-86074

$9,221.99

THIS ITEM SHIPS FOR FREE!
Direct Ship Ships in: 1+ month

  • Will lash any single or multiple aerial cables up to 3 in. (76mm) diameter across on any suspension strand from 1/4 in. (6mm) to 7/16 in. (11mm). A factory modification will allow the lasher to accommodate a 1/2 in. (12.7mm) strand if necessary.
  • Consists of a rotating drum supported on a carriage that provides the mounting for a driving mechanism, cable lifters, cable and strand rollers
  • Each of the two recessed magazines will hold a 1200 ft. coil of .045 in. (365m of 1.1mm wire) lashing wire (or 450 ft. of .065 in.). The Lashing Wire is fully recessed and covered by a gate.

GMP J2 Cable Lasher Without Strand Lock

The GMP J2 Cable Lasher Without Strand Lock is used to lash a single aerial cable or numerous cables to a supporting strand or to an existing lashed cable with stainless steel lashing wire.

Features:

  • Will lash any single or multiple aerial cables up to 3 in. (76mm) diameter across on any suspension strand from 1/4 in. (6mm) to 7/16 in. (11mm). A factory modification will allow the lasher to accommodate a 1/2 in. (12.7mm) strand if necessary.
  • Consists of a rotating drum supported on a carriage that provides the mounting for a driving mechanism, cable lifters, cable and strand rollers
  • Each of the two recessed magazines will hold a 1200 ft. coil of .045 in. (365m of 1.1mm wire) lashing wire (or 450 ft. of .065 in.). The Lashing Wire is fully recessed and covered by a gate.
  • Features a fast setup procedure, quick coil loading, and automatic drum lock for easy span transfers and smooth forward travel
  • J2 Lashers make overlashing easy. Just push down on the strand roller knob, rotate it a quarter turn and you can lash additional cables together on previously lashed cable
  • Positive internal gear-to-gear mechanism has no chains or belts to stretch, slip or break
  • Constructed with heat-treated, plated steel, stainless steel, brass, and aluminum components. Contains sealed and oiless bearings to minimize maintenance and assure durability.
  • Pre-drilled and tapped at the factory for mounting of the lasher guard or “halo”. For use when lashing in overgrown areas.
  • The J2 and every GMP lasher is fully serviceable to “good-as-new” specifications at our factory and at factory-trained service locations around the globe.
  • The lasher is furnished with a rugged lightweight storage chest with corrosion-resistant hardware, recessed latches, and a moisture-proof, tongue-in-groove design for maximum protection when not in use
  • Supplied with a 6 ft. bridle rope assembly and snap hooks, and an information and operation manual 
  • Model 86074 J2B Cable Lasher without strand lock and relieved for overlashing

GMP-86074
Manufacturer: GMP
Material: Plated Steel Alloy
Stainless Steel
Weight: 46.00

Reviews

YOU HAVE NO ITEMS IN YOUR CART.