The Standing Seam Roof Anchor SSRA1 is a revolutionary product that allows homeowners, building owners, and contractors to work safely on standing seam roofs without penetrating the panels. Engineered to revolutionize fall protection anchorage attachment on Standing Seam Roofs!  This model comes with the optional nylon tip set screws pre-loaded into the anchor and a full set of stainless steel cupped tip set screws is also included in the box!

• Only 4.5 lbs! World's lightest OSHA 5,000 lbs certified anchor. Installs in minutes with basic hand tools. Can be used for temporary or permanent attachment.
• Patented, universal fit design works on over 500 Standing Seam Panel Profiles with no reassembly required! Fits t-seams, bulb seams, SnapLok, single lok, double lok, MR-24, etc. No other anchor fits as many profiles. List of compatible profiles can be found on the Panel Compatibility Tab.
• ANSI ASTM B-117 Salt Spray tested, non-corrosive aluminum and stainless steel components. Can be powdercoated to color match roofs for permanent installations.
• Made in USA with a Lifetime Life Saving Warranty.
• Clean, low profile attachment to the seam minimizes tripping hazards and is less obtrusive on permanent attachments.
• OSHA tested to 5,000 lbs in ALL directions of pull. Workers can access both sides of the roof without having to reposition the anchor. Test report can be reviewed on the Test Report Page.
• The only certified component system for mounting just about anything to a standing seam roof. The interchangeable mount allows for attachment of devices from various fall protection manufacturers. Can be used for attachment of roof jacks, walk boards, SRLs, horizontal lifelines, ladder anchoring, etc.