TowerPlex Aviation White Tower Paint - 1 Gallon Pail

FREE SHIPPING OVER $199!
Status:
FREE SHIPPING OVER $199!
$39.99
TowerPlex coatings are a specially formulated, pure 100% acrylic emulsion coating thoroughly tested and formulated for use on galvanized antenna towers or other metal or surfaces. The alkalinity of the vehicle will etch into the zinc unlike ordinary enamels and form a chemical bond. This product dries quickly and has excellent weathering properties. (CC2919)

TowerPlex Aviation White Tower Paint - 1 Gallon Pail

TowerPlex coatings are a specially formulated, pure 100% acrylic emulsion coating thoroughly tested and formulated for use on galvanized antenna towers or other metal or surfaces. The alkalinity of the vehicle will etch into the zinc unlike ordinary enamels and form a chemical bond. This product dries quickly and has excellent weathering properties. 


Common Usage:
This product is specifically designed for use on galvanized antenna towers. It meets Federal Standard 595 color #17875 White. Also complies with national Bureau of Standards report NBS1R75-663 and F.A.A. A/C70/7460-1H.


Surface Preparation:

New Galvanize: Must be dry. Clean all oil, grease, or other contaminants in accordance with SSPC-SP1 standards. For maximum performance and when feasible, if spangle is present it is recommended to brush blast to gray galvanize or etch with hydrochloric acid until weathered gray appearance is reached. Follow with clear water rinse until surface is free of blast or etch residue. Note: when blasting or etching use caution to avoid removing excess zinc metal.

Existing Towers: Must be dry. Spot prime all rusted areas and remove any contaminants including chalk, dirt, grease, failing paint, etc. Prior to application, prepare substrate in accordance with SSPC-SP1 standards. On unpainted surfaces, clean contaminants such as dirt, white Zinc oxide, etc. and spot prime rusted areas.


Primer Coats:

  • Existing Towers: Spot prime rust areas with TowerPlex CC2925 Rust Inhibitive Waterborne Primer. 
  • New Galvanize: Self-priming, or TowerPlex CC2925 for maximum performance.


Recommended Spreading Rate per coat:

  • Suggested / Minimum / Maximum
  • Dry Mils: 2.0, 1.6, 3.0
  • Wet Mils: 5.4, 4.4, 8.1 
  • Coverage sq ft/gal: 296, 197, 370


Theoretical Coverage:

  • 592 ft2/gallon at 1 mil dry, assuming no application losses.
  • Coverage will vary depending on color, the surface texture and application technique.


Drying Schedule @ 4.0 mils wet (100 microns):

  • @ 55°F/13°C @ 77°F/25°C @ 100°F/38°C
  • 50% RH
  • To touch: 3 hours 30 minutes 10 minutes
  • To handle: 7 hours 1 hour 1 hour
  • To recoat: 18 hours 4 hours 3 hours
  • To cure: 30 days 20 days 10 days
  • Drying time is temperature, humidity, and fi lm thickness dependent.


Shelf Life: 

  • 36 months, unopened
  • Store indoors at 35°F to 110°F 
  • Flash Point: >200°F (93°C), PMCC
  • Reducer/Clean Up: Soap & Water


Application Considerations:

Apply by brush, mitt, roller, or spray. When the temperature is above 90°F make sure that full wet coats are applied, overlapping each pass 50% to avoid dusting. Material can freeze. Avoid applying when overnight freeze or rain is possible. Coverage will vary depending on surface texture, equipment in use, application methods, and experience of the applicator.


Touch-Up:

Proper touch-up is accomplished by applying a thin coat of this product over a well coated surface using the same method of application as used to apply the finish coat, that is, spray over spray, roller over roller. If the finish coat is sprayed, it is also possible to spray a small amount into an empty container, then touching up with a foam brush. Touch up should be done within 5°F of the original temperature.



More Information
SKU AA-CC2919
Manufacturer TowerPlex
Country of Manufacture United States
Manufacturer Model CC2919
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

Product Documents

PEOPLE ALSO BOUGHT

  1. Industrial Tower Painter's Mitt
    WBC-R044
    Industrial Tower Painter's Mitt
    $4.99
  2. 17448, Elk River 1” x 4-7/8” x 3-1/8” x 1” Gate Opening Carabiner
    FP-17448
    Elk River 17448 Steel Carabiner
    $13.47
  3. Rock Exotica P51 Omni-Block Swivel Pulley
    Multiple Options Available
    Rock Exotica P51 Omni-Block Swivel Pulley
    $92.00
  4. 3" Economy Chip Brush - 12 Pack
    WBC-F5117-3
    Wooster 3 Inch Economy Chip Brush
    $0.99
  5. C07 Petzl St' Anneau Dyneema Sling
    Multiple Options Available
    Petzl C07 St' Anneau Dyneema Sling
    $7.95 - $16.95
  6. Elk River Peregrine Platinum Series Harness with Adjustable/Detachable Seat
    Multiple Options Available
    Elk River 67630 Peregrine RAS Platinum Tower Climbing Harness
    $490.18
  7. GME 9025 Supply Rescue Kit
    GM-9025
    GME Supply 9025 Rescue Kit
    $574.99
  8. Tower Climbing Job Site Safety Banner
    Multiple Options Available
    Tower Climbing Job Site Safety Banner
    $49.99 - $79.99
  9. Guardian 01503 Rope Grab with Lanyard
    GF-01503
    Guardian 01503 Rope Grab with Lanyard
    $97.99
  10. Chicago Hardware Galvanized Screw Pin Shackle
    Multiple Options Available
    Chicago Hardware Galvanized Screw Pin Shackle
    $9.50
  11. Kask Super Plasma V2 Visor - Transparent
    Multiple Options Available
    Kask Super Plasma V2 Visor
    $55.95 - $76.45
  12. ISC Gecko Carabiner
    Multiple Options Available
    ISC Gecko Carabiner
    $25.40 - $32.85