Crosby G-209A Alloy Screw Pin Anchor Shackles meet or exceed all requirements of ASME B30.26 including identification, ductility , design factor, proof load and temperature requirements. Importantly, these shackles meet other critical performance requirements including impact properties and material traceability, not addressed by ASME B30.26.
Features:
- Approved for use at -40° C (-40° F) to 204° C (400° F)
- Forged Alloy Steel – Quenched and Tempered, with alloy pins
- Working Load Limit permanently shown on every shackle
- Meets the performance requirements of RR-C-271H, Type IVA, Grade B, Class 2, except for those provisions required of the contractor
Specifications:
- Size (Shackle Body Thickness): 3/8"
- Throat Opening (Width Between Ears): .66"
- Throat Depth: 1.45"
- Pin Size: .44"
- Pin Type: Screw Pin
- Finish: Hot Dip Galvanized
- Material: Alloy Steel Body & Alloy Steel Pin
- Design Factor 4.5:1
- Standards & Ceritfications: ASME B30.26
NOTE: These shackles meet other critical performance requirements including impact properties and material traceability, not addressed by ASME B30.26
