Miller BackBiter Tie-Back Twin Leg Lanyard

Miller BackBiter offers the ultimate in tie-back safety! The webbing and snap hooks of regular lanyards are not designed to withstand the rigors of tying back. The innovative Miller BackBiter Tie-Back Lanyard with a Miller 5K® Snap Hook was designed from top to bottom for tie-back use.

Materials:

• Webbing: 1-3/8 in. (35mm) Green or Blue Polyester
• SofStop Shock Absorber
• - Webbing: Polyester
• - Safety Strap (Inside SofStop): 1 ¾ in. (45mm) Polyester
• Locking Snap Hook: Steel, 3/4” (19mm) gate opening
• Miller 5K Locking Snap Hook: Steel, 5/8” (16mm) gate opening
• Thread: Six cord bonded, three strand polyester thread
• Labels: Valeron
• All hardware meets ASTM (50) fifty-hour salt spray test requirements

Certification:

• OSHA 1910.66, 1926.104, 1926.502; 
• ANSI A10.32, Z359.13; CSA Z259.11 Class E4 (models with “C” in part number),
• CSA Z259.11 Class E6 (models with “E6” in part number)

Technical:

• Length: 6'
• Minimum Tensile
• - Lanyard Webbing: 12,000 lbs (53.4kN)
• - SofStop Safety Strap Webbing (inside the SofStop): 5,000 lbs (22kN)
• - Snap Hook: 5,000 lbs (22kN)
• - Thread: 42lbs (0.18kN)