GMP Super G Large Capacity Cable Lasher

The largest of the GMP Lashers, the GMP Super G Large Capacity Cable Lasher is designed to lash a large single or a combination of aerial cables to a supporting strand. It can be used for new installs or with existing cables in place. You can use the Super G to lash a single cable of almost any type, including telephone and fiberoptic cables up to 5.25 in. (133mm) in diameter. The Super G has the capability to lash up to a 5.75 in. (146mm) bundle of any assortment of innerduct, fiber, copper and coaxial cables as well. The strand sizes range from .34 to .50 inch diameter or 8.73mm through 12.7mm. Your lasher is designed to use two wires simultaneously (also known as “double lashing”). Like other GMP lashing machines, the balance of the Super G is not affected by the amount of wire loaded in either magazine. The Super G is driven by the lashing wire exiting the machine so the lasher can be pulled from any direction. The lashing wire rotates drive wheels that rotate the lasher.

Features:

• Lashes cable from about 2-1/2 to 5-1/4 in. outside diameter or multiple cables up to 5-3/4 in. combined outside diameter
• Lashes on strand from 11/32 to 1/2 in. diameter with one or two spiral wrappings of .045, .061, or .065 in. diameter stainless steel wire
• Nominal spacing between wraps is approximately 18-19 in. (46 to 48cm )
• Parallel-pull capability overcomes most terrain obstacles
• Wire tension constant regardless of the amount on the spool
• Front rollers guide cables through the machine
• All smooth edges throughout help protect against cable damage
• The ergonomic design makes it easy to handle
• Each lasher includes a 6 ft. bridle rope assembly with snap hooks, user information, and operations manual, and a heavy-duty storage chest
• Comes with 2 extra reels for easy loading in the field