Hours: 7am-7pm CST M-F 8am-1pm CST Sat

Welcome, Guest!

ASK A GEAR EXPERT(800) 940-6762

0

DBI Sala 2108406 Fixed Beam Anchor

Part Number: 2108406

Availability: In stock

Quick Overview

DBI Sala Fixed beam anchor fits 2-1/2 in. to 12 in. wide I-beams (6.3-30.5cm) up to 1-1/2" thick (3.8cm).

DBI Sala 2108406 Fixed Beam Anchor

Part Number: 2108406

Availability: In stock

Quick Overview

DBI Sala Fixed beam anchor fits 2-1/2 in. to 12 in. wide I-beams (6.3-30.5cm) up to 1-1/2" thick (3.8cm).
FREE SHIPPING!
$384.99

DBI Sala 2108406 Fixed Beam Anchor

DBI Sala 2108406 Fixed Beam anchorage connectors are built from top quality materials guaranteeing high strength and durability to stand up to the toughest environments. Anchorage connectors are the unsung heroes of most fall protection systems, often overlooked but critical components because they securely attach your system to the anchorage. Your choice of anchor depends on the type of work being done. Anchorages are sold by what they connect to (general/all purpose, steel, concrete, roof or specialty), whether they are fixed or mobile, and whether they are permanent or portable. They all must provide a secure point of attachment for a complete personal fall arrest system, and must be capable of supporting a load of 5,000 lbs. (22kN) or of meeting OSHA’s criteria of a 2-to-1 safety factor.

  • Installs onto 2-1/2 in. to 12 in. wide I-beam flange (6.3-30.5cm) up to 1-1/2" thick (3.8cm).
  • Attach in any orientation or direction
  • Compact and lightweight design
  • High strength steel and aluminum construction
  • Extremely rugged and corrosion resistant
  • Swiveling D-ring tie-off point
  • Detent style attachment with built-in tightening handle

The fixed beam anchor is specifically designed for a fall arrest anchorage and also makes an excellent end point for our Sayfline synthetic horizontal lifeline system and other similar DBI/SALA approved systems. It installs in seconds to the beam structure, with final tightening using a built-in adjustment handle. Attach it to the beam structure in any orientation or direction for added versatility. DBI/SALA beam anchors provide economical flexibility. You can also depend on both our fixed and sliding beam anchors to stay securely attached to a horizontal beam. If there is a fall, we make sure you're secure!


Specifications:

  • Attachment Type Info: Clamp
  • Fits I-Beam Flange Width: 2-1/2 to 12 in. (6.3-30.5cm)
  • Install Type: Reusable
  • Capacity: 310 lbs. (141 kg) ANSI / 420 lbs. (190 kg) OSHA
  • Brand: DBI-SALA®
  • Size: 2-1/2 in. to 12 in. wide (6.3-30.5cm) up to 1-1/2" thick (3.8cm)
  • Velocity Ship: Yes
  • iSafe Equipped: Yes
  • Length: 2-1/2 in. to 12 in. wide (6.3-30.5cm) up to 1-1/2" thick (3.8cm)
  • Label: Vinyl
  • Fastener: Stainless Steel and Zinc Plated Steel
  • Detent Pin: Stainless Steel
  • Model: 2108406
  • Physical Dimensions: 20.00x2.50x4.00 (in)
  • Physical Weight: 5.30 lbs (2.4kg)
  • Product Styles: Fixed
  • Product Types: Anchors for Steel
  • Standards: OSHA 1910.66, OSHA 1926.502, Capital Safety Gen. Mfg. Req., ANSI A10.32, ANSI Z359.1
Tell us what you think about this item!

Product Description

DBI Sala 2108406 Fixed Beam Anchor

DBI Sala 2108406 Fixed Beam anchorage connectors are built from top quality materials guaranteeing high strength and durability to stand up to the toughest environments. Anchorage connectors are the unsung heroes of most fall protection systems, often overlooked but critical components because they securely attach your system to the anchorage. Your choice of anchor depends on the type of work being done. Anchorages are sold by what they connect to (general/all purpose, steel, concrete, roof or specialty), whether they are fixed or mobile, and whether they are permanent or portable. They all must provide a secure point of attachment for a complete personal fall arrest system, and must be capable of supporting a load of 5,000 lbs. (22kN) or of meeting OSHA’s criteria of a 2-to-1 safety factor.

  • Installs onto 2-1/2 in. to 12 in. wide I-beam flange (6.3-30.5cm) up to 1-1/2" thick (3.8cm).
  • Attach in any orientation or direction
  • Compact and lightweight design
  • High strength steel and aluminum construction
  • Extremely rugged and corrosion resistant
  • Swiveling D-ring tie-off point
  • Detent style attachment with built-in tightening handle

The fixed beam anchor is specifically designed for a fall arrest anchorage and also makes an excellent end point for our Sayfline synthetic horizontal lifeline system and other similar DBI/SALA approved systems. It installs in seconds to the beam structure, with final tightening using a built-in adjustment handle. Attach it to the beam structure in any orientation or direction for added versatility. DBI/SALA beam anchors provide economical flexibility. You can also depend on both our fixed and sliding beam anchors to stay securely attached to a horizontal beam. If there is a fall, we make sure you're secure!


Specifications:

  • Attachment Type Info: Clamp
  • Fits I-Beam Flange Width: 2-1/2 to 12 in. (6.3-30.5cm)
  • Install Type: Reusable
  • Capacity: 310 lbs. (141 kg) ANSI / 420 lbs. (190 kg) OSHA
  • Brand: DBI-SALA®
  • Size: 2-1/2 in. to 12 in. wide (6.3-30.5cm) up to 1-1/2" thick (3.8cm)
  • Velocity Ship: Yes
  • iSafe Equipped: Yes
  • Length: 2-1/2 in. to 12 in. wide (6.3-30.5cm) up to 1-1/2" thick (3.8cm)
  • Label: Vinyl
  • Fastener: Stainless Steel and Zinc Plated Steel
  • Detent Pin: Stainless Steel
  • Model: 2108406
  • Physical Dimensions: 20.00x2.50x4.00 (in)
  • Physical Weight: 5.30 lbs (2.4kg)
  • Product Styles: Fixed
  • Product Types: Anchors for Steel
  • Standards: OSHA 1910.66, OSHA 1926.502, Capital Safety Gen. Mfg. Req., ANSI A10.32, ANSI Z359.1

Specifications

Reviews

Tell us what you think about this item!

Questions