Dropped Objects Prevention

  1. Tenacious Work Gear from Ergodyne

    Ergodyne Be Seen Stay Safe

    Ergodyne has been developing products to make the workplace better since 1983. This week we highlight our growing selection of newer tools and PPE from Ergodyne offered here at GME Supply including tool tethers, safety glasses, gloves, and more. 

     

    Tool Tethers


    The ISEA/ANSI 121 Dropped Objects Prevention Standard outlines the safety standards and requirements for testing at-height tool tethering equipment in order to increase safety. While there are not currently any OSHA requirements specific to general or construction industries, many contractors and employers have begun implementing mandates within their companies or job sites for required 100% tie-off for all drop hazards.

    Tool tethers have been around for quite a few years. However, traditionally they were referred to as tool lanyards. The industry has adopted the name tool tethers to prevent confusion between tool drop prevention equipment and shock-absorbing lanyards. Tool tethers, like most equipment in the at-height industry, come in a range of shapes and sizes.

    We offer a huge selection of Ergodyne Tool Tether solutions for many tool types and sizes. If you need a tool tether with a larger capacity click here to contact one of our Gear Experts®.



    Ergodyne Glasses


    When it comes to compliance, Ergodyne goes above and beyond with their Skullerz® Safety Glasses. That way, every time you wear Skullerz® Safety Glasses you can be sure of some important aspects: 

    First, Skullerz® Safety Glasses are third-party tested for ANSI Z87.1+ High Velocity Impact protection and optical performance and also third-party tested for MIL-PRF-32432 Ballistic Impact Fragmentation - Class 1. Other safety glasses aren't tested for compliance at those levels and often don’t hold up under the same scrutiny.

    Every pair of Skullerz® Safety Glasses also feature anti-scratch lenses with 99.9% UVA, UVB, and UVC protection. You get a number of frame patterns to suit your style and 

     

    Ergodyne Gloves


    Ergodyne stands out in quality, design, and style with everything they manufacture and their gloves are no exception. And, as the temperature starts to drop this season, Ergodyne’s thermal hand protection can keep your hands safe from work hazards and the frigid weather. 

    It’s important to choose a glove that can provide wind and water-resistance alongside your typical search for performance measures like impact, puncture, and tear resistance. We have quite a few different styles of thermal gloves from Ergodyne that will meet your comfort performance needs and make working in the cold more bearable.

     

    Ergodyne Video:


    **The content of this blog is not intended to replace proper, in-depth training. The manufacturer’s instructions must also be followed and reviewed before any equipment is used.

    Looking for more information about tool tethers? Click here to contact one of our Gear Experts®.

    Click here to see our full selection of Tool Tethers

    Click here to see our full selection of Tools

    Gear Up with Gear Experts Podcast Episode 9 - Tool Tethering

    Click Here to listen to our Gear Experts discuss tool tethering:

     

    Get Social


    Be sure to follow us on social media to keep up with everything GME Supply has going on.

    Facebook | Instagram | YouTube | Twitter | LinkedIn

  2. 3M Fall Protection for Tools Sample Tool Tether Pack

    3M Fall Protection for Tools Sample Pack

    The ISEA/ANSI 121 Dropped Objects Prevention Standard outlines the safety standards and requirements for testing at-height tool tethering equipment in order to increase safety. This doesn't mean that there will be a requirement for tethering. However, in the future, it may be standardized across different industries.

    3M has developed a wide range of excellent tools for drop prevention and we helped select a wide variety to showcase in the 3M Fall Protection for Tools Sample Pack. Buy a Tower Climbing Kit and receive the 3M Fall Protection Sample Pack for FREE for a limited time. The sample kit includes 9 pieces of awesome gear from 3M.

    This kit includes:

    Watch our video outlining the kit and scroll further for descriptions of different drop prevention issues and solutions.

    The Full Video:


    Check out 3M Fall Protection for Tools Sample Pack here ↓

     

    Tool Tethers


    Tool tethers have been around for quite a few years. However, traditionally they were referred to as tool lanyards. The industry has adopted the name tool tethers to prevent confusion between tool drop prevention equipment and shock absorbing lanyards. Tool tethers, like most equipment in the at-height industry, come in a range of shapes and sizes.

    How They Work


    Dropped objects are still a huge cause of injury and death in the United States. Tool tethers are designed to help prevent those casualties and also prevent lost productivity and damaged equipment.

    Tool tethers have a range of connections points and a variety of different weight capacities ranging from 1 to 15 pounds. The weight capacity is based on the weight of the tool.

    If you need a tool tether with a larger capacity click here to contact one of our Gear Experts®.

    Connecting the tool tether to the tool itself can be done in a few different ways. If the tool has a tether connection built-in, then you are good to go. Simply attach the connection point of the tether to the tool and you’re in business. If you find yourself in a situation where the tool does not have a tether point, there are solutions available. Some options include:

    Self-Adhering Tape – This is a tape that has been designed to adhere to a connection point to your tool.

    Tool Collars – These are components that help retrofit a range of tools with a connection point without hindering the ability to use the handle of the tool.

    Tool tethers come in a range of lengths that not only provide easier use when working but also provide added force reduction in the event of a drop. Another option, if you need to be able to adjust the length, is to use a retractable tether. Think of retractable tethers as mini SRLs for your tools. It functions in much the same way.

    **The content of this blog is not intended to replace proper, in-depth training. Manufacturer’s instructions must also be followed and reviewed before any equipment is used.

    Looking for more information about tool tethers? Click here to contact one of our Gear Experts®.

    Click here to see our full selection of Tool Tethers
    Click here to see our full selection of Tools

    Gear Up with Gear Experts Podcast Episode 9 - Tool Tethering

    → Click Here to listen to our Gear Experts discuss tool tethering:

    The Full Video:


    Check out 3M Fall Protection for Tools Sample Pack here ↓

     

    Get Social


    Be sure to follow us on social media to keep up with everything GME Supply has going on.

    Facebook | Instagram | YouTube | Twitter | LinkedIn

    We’re Also on Snapchat


    Simply snap or screenshot this image ↓ to follow GME Supply!

  3. Product Spotlight: Ty-Flot Quick Switch

    Injuries and fatalities resulting from dropped tools are a growing concern in all at-height industries. Many general contractors and tower owners are now requiring tools to be tethered while on the job site. This week our Gear Experts® are going to break down the Quick Switch from Ty-Flot and how it can make tool tethering easier while on the job.

    Growing Concerns


     

    Before we break down the kit, we want to address some of the concerns about dropped objects. As we mentioned above, many GCs, tower owners, and other companies are requiring tool tethering on job sites. That’s because, according to the Bureau of Labor Statistics, over 50,000 “struck by falling object” OSHA reports are submitted every year. Not only is the person holding the tool at risk, but the people below, pedestrians outside the job site, equipment, and lost time are all at risk when tool tethering is not used.

    ISEA/ANSI 121 Dropped Objects Prevention Standard


     

    The ISEA/ANSI 121 Dropped Objects Prevention Standard was released in July of 2018 with the mission of setting safety requirements for the testing of at-height tool tethering equipment. While this standard does not require the use of tool tethers, it does ensure that as long as the tethering equipment you purchase has the ISEA/ANSI 121 badge, you can be sure that the tethers can handle the job. For more information about the Dropped Objects Prevention Standard, click here to check out our blog post.

    Ty-Flot Quick Switch


     

    The Ty-Flot Quick Switch is one of the most innovative solutions for 100% tool tie-off. This line of tool tethering equipment will ensure that you can stay safe on the job without sacrificing productivity. It's expert design allows you to retain the freedom to move your hands freely while working at height.

    Dock and Switch


     

    Keeping the ability for you to use your hands freely while still having 100% tool tie-off can be achieved thanks to Ty-Flot’s unique dock and switch system. There is a clip attached to the tool tether. The clip can be attached to the doc on a bolt bag or other Quick Ship attachment point or via the Quick Switch Wrist Straps. When the tether clip is attached to a dock it cannot be removed unless it is attached to another dock (see the video below for more information on how to dock the lanyard correctly).

    Fully Contained


     

    The Ty-Flot Quick Switch system has another unique feature: it’s always contained on your wrist. Unlike other tool tethering systems, the Quick Switch has been designed with mobility in mind. Staying contained on your wrist provides other benefits as well. It greatly reduces the swing motion when a tool is dropped and it makes sharing tools with co-workers much easier – while still maintaining 100% tie-off.

    Features


     

    The short tether reduces the risk of snagging and fatigue which is common in elastic tool tethers that are longer and attached to your belt. This increases the useful life of the tool tether and helps keep your replacement costs down. Don’t let the small size fool you, though, because this tool tether can hold up to 6 pounds. It’s compatible with Ty-Flot’s entire line of tool collars and any other tool collars available on the market.

    Click here to see Ty-Flot Quick Switch Products

    Click here to see our full selection of Ty-Flot tool tethering gear

    Click here to see all of our tool tethering gear

    Click here for more information on the ISEA/ANSI 121 Dropped Objects Prevention Standard

    **The content of this blog is not intended to replace proper, in-depth training. Manufacturer’s instructions must also be followed and reviewed before any equipment is used.

    Ty-Flot Quick Switch: The Video


     

    Gear Up with Gear Experts: The Podcast


     

    If you haven’t already checked out Gear Up with Gear Experts, our podcast dedicated to at-height, industry, and construction, it is available for download! You can find it on all major podcast listening platforms like Apple Podcasts, Spotify, Google Play Music, + your favorite podcatcher of choice. And, you can head on over to gearexperts.com to follow us on social media, check out our detailed show notes, and sign up for updates.

    Get Social


     

    Be sure to follow us on social media to keep up with everything GME Supply has going on.

    Facebook | Instagram | YouTube | Twitter | LinkedIn

    We’re Also on Snapchat


     

    Simply snap or screenshot this image ↓ to follow GME Supply!

  4. Tool Tethers

    The ISEA/ANSI 121 Dropped Objects Prevention Standard has officially been released so we wanted to take some time to discuss everything involved with the Dropped Objects Prevention Standard. ANSI 121 is outlines the safety standards and requirements for testing at-height tool tethering equipment in order to increase safety. This doesn't mean that there will be a requirement for tethering. However, in the future, it may be standardized across different industries. This week our Gear Experts® are going to discuss tool tethers and how you can prepare to be in compliance with ANSI 121.

    Tool Tethers


     

    Tool tethers have been around for quite a few years. However, traditionally they were referred to as tool lanyards. The industry has adopted the name tool tethers to prevent confusion between tool drop prevention equipment and shock absorbing lanyards. Tool tethers, like most equipment in the at-height industry, come in a range of shapes and sizes. GME Supply is happy to partner with leading names in the tool tethering industry like Ty-Flot, Ergodyne, Klein Tools, and DBI Sala.

    How They Work


     

    Tool tethers help prevent injury, damage to expensive equipment or tools, and lost productivity. Believe it or not, dropped objects are still a huge cause of injury and even death in the United States. Tool tethers have a range of connections points. Almost all the tethers we offer feature a carabiner for connection to your harness or bolt bag. The carabiners are available in single and double action configurations.

    Tool tethers have a variety of different weight capacities ranging from 1 to 15 pounds. The weight capacity is based on the weight of the tool. If you need a tool tether with a larger capacity click here to contact one of our Gear Experts®.

    Connecting the tool tether to the tool itself can be done in a few different ways. If the tool has a tether connection built in, then you are good to go. Simply attach the connection point of the tether to the tool and you’re in business. If you find yourself in a situation where the tool does not have a tether point, there are solutions available. Some options include:

    Self-Adhering Tape – This is a tape that has been designed to adhere a connection point to your tool.

    Tool Traps – This is a “holster” that your tool can fit in that provides the connection point and can stay on the tool while it's being used. It is most common to find this for measuring tapes and power tools.

    Tool Collars – These are components that help retrofit a range of tools with a connection point without hindering the ability to use the handle of the tool.

    Tool tethers come in a range of lengths that not only provide easier use when working but also provide added force reduction in the event of a drop. Another option, if you need to be able to adjust the length, is to use a retractable tether. Think of retractable tethers as mini SRLs for your tools. It functions in much the same way.

    We know what your thinking! Having 15 different tethers for your tools is going to add a lot of weight and be inconvenient when you’re up 150 feet on a tower. But don’t worry, we’ve got you covered there too. There are many tool tethers that have a modular construction. Essentially there is a clip below the shock absorbing portion of the tether that can be swapped out. So, instead of having a tether for each tool you can simply have a connection point and tether loop on each of your tools that can be easily switched out.

    Drop Test


     

    We decided to do a drop test to see the forces placed on your body by a dropped tool. For this test, we used the Rock Exotica LC1 Enforcer Load Cell. For a control, we utilized a static sling. When we dropped a Klein Bull Pin (which weighs 3 pounds) the forces maxed out at 98 pounds. With a variety of tool tethers, we had forces range from 70 to 38 pounds. That’s a significant difference from the 98-pound static drop!

    **The content of this blog is not intended to replace proper, in-depth training. Manufacturer’s instructions must also be followed and reviewed before any equipment is used.

    Looking for more information about tool tethers? Click here to contact one of our Gear Experts®.

    Click here to see our full selection of Tool Tethers

    Click here to see our full selection of Tools

    The Full Video:


     

    Check out the full video of our drop test here ↓

     

    Tool Tethers: The Playlist


     

    Over the years we have featured a ton of different tool tethers. Check out the full playlist on our YouTube Channel or, right here ↓

    Get Social


     

    Be sure to follow us on social media to keep up with everything GME Supply has going on.

    Facebook | Instagram | YouTube | Twitter | LinkedIn

    We’re Also on Snapchat


     

    Simply snap or screenshot this image ↓ to follow GME Supply!

4 Item(s)