August 2019

  1. Product Spotlight: Arbor Ropes from Sterling Rope

    Sterling Rope Tree Care

     

    Working in the tree care industry, like most at-height industries, requires a set of special equipment to keep you safe and get the job done right. One key piece of equipment rope. The week our Gear Experts® are going to break down some Sterling ropes specifically designed for our arborist friends in the tree care industry.

    Atlas Rig Line

    When you’re removing large trunk sections of a tree you need to know that your rigging system can handle and absorb large dynamic forces. Sterling has been designing ropes to handle large kinetic forces for over 20 years and they designed their Atlas Rig Line specifically for this purpose.

    Features

    The Atlas Rig Line is ideal for removing tree trunk sections, is available in blue and white, and comes in 150, 200, or 600-foot lengths. It is a 9/16” rope with a polyester sheath and nylon core. And, it offers a soft hand, easy knotability, and is designed to be used in a rope friction device, capstan hoist, or pulley.

    Specifications

    The specifications of this rope just go to prove that it means business. With a minimum breaking strength of 11,050 pounds and an average breaking strength of 13,750 pounds – this rope can handle nearly any job. And, it meets ANSI Z133.1 requirements.

    Scion Climbing Line

    Next, we are going to cover the Scion Climbing Line from Sterling. This rope was developed with climbing in mind. It has a very durable construction and has been designed to absorb large dynamic forces.

    Features

    The Scion Climbing Line is ideal for both Doubled Rope Technique (DdRT) and Single Rope Technique (SRT). It is an 11.5 mm rope with a 24-strand polyester cover. The double braided construction provides decreased elongation, easy hand, and great knotability. The tight, durable sheath allows the rope to handle mechanical devices and hardware well and sewn termination ends are available in all length and color options.

    Specifications

    Speaking of length and color options - this rope is available in orange, blue, and green. And, it comes in 150, 200, and 600-foot lengths. For standards, it meets both EN 1891 type A and ANSI Z133 requirements so you know this rope is up to the challenge.

    Click here to see the Sterling Rope Atlas Rig Line

    Click here to see the Sterling Rope Scion Climbing Line

    Click here to see our full selection of Sterling Rope Products

    Click here to see our full selection of tree care products

    **The content of this blog is not intended to replace proper, in-depth training. Manufacturer’s instructions must also be followed and reviewed before any equipment is used.

    Sterling Rope Arbor Ropes: The Video


    Gear Up with Gear Experts: The Podcast

    If you haven’t already checked out Gear Up with Gear Experts, our podcast dedicated to at-height, industry, and construction, it is available for download! You can find it on all major podcast listening platforms like Apple Podcasts, Spotify, Google Play Music, + your favorite podcatcher of choice. And, you can head on over to gearexperts.com to follow us on social media, check out our detailed show notes, and sign up for updates.

    Get Social

    Be sure to follow us on social media to keep up with everything GME Supply has going on.

    Facebook | Instagram | YouTube | Twitter | LinkedIn

    We’re Also on Snapchat

    Simply snap or screenshot this image ↓ to follow GME Supply!

  2. Product Spotlight: TowerPlex Tower Paint

    Painting a tower isn’t like painting most other things. In fact, there is a lot of science (and regulation) that goes into developing a paint that is tough enough to handle the job while meeting federal requirements. We’ve covered the basics of tower paint in this previous blog post. This week our Gear Experts® are going to break down TowerPlex Tower Paint.

    TowerPlex Formula


    TowerPlex Tower Paint is formulated to offer durable, long-lasting protection for galvanized towers and other metal surfaces. Our entire TowerPlex line is a pure 100% acrylic emulsion coating that has been thoroughly tested on galvanized and other metal surfaces. Additionally, it meets all federal standards for aviation safe colors. We talked about why you can’t just use any orange or white paint and meet aviation regulations in our Tower Paint 101 blog post which you can find by clicking here.

    How the Paint Works


    The reason why TowerPlex paint is so good for use on towers is because of the alkalinity of the paint itself. The alkaline in the paint allows it to etch itself into the zinc of the galvanized surface. This process allows the paint to form a chemical bond with the tower which subsequently allows the paint to dry quickly and maintain excellent weather resistance.

    Surface Prep


    Before you just grab some paintbrushes or a paint sprayer and start the job, it’s important to properly prep the surface for painting. Every section you are painting must be dry and clean. Make sure that you wipe off any dirt, grime, oil, and anything else that shouldn’t be on the surface. If possible, any spangle needs to be brush blasted or etched with hydrochloric acid until a weathered gray appearance is achieved.

    Primer, Application, and Coverage


    If you are painting an existing tower, be sure to spot prime any rust. If you plan on using TowerPlex paint, the best primer to use is the TowerPlex CC2925 Rust Inhibitive Bonding Primer.

    The paint can be applied from 50 to 110 degrees Fahrenheit (10 – 43 degrees Celsius). But, be sure to avoid painting if an overnight freeze is expected or if rain is in the forecast as this can prevent the paint from drying correctly. If the temperature is above 90 degrees Fahrenheit, make sure that you apply a full wet coat and overlap 50% on each pass to help avoid dusting. Applying the paint can be done with a brush, mitt, or a sprayer. For the best results, TowerPlex recommends two coats over an entire prime base.

    If you think you might need to paint, but you’re not sure if you do or not, you can use the FAA In-Service Orange Color Range Chart to help you decide. Click here for a tutorial on how the FAA Service Chart works.

    Cold Galv Work


    If you need to do any cold galv work before you start painting, we’ve got you covered there, too. Click here to check out our blog post on cold galvanizing compound.

    Click here to see our full selection of TowerPlex products

    Click here to see our full selection of painting gear

    Click here to see our Tower Paint 101 blog post

    Click here to see our full selection of Cold Galv

    **The content of this blog is not intended to replace proper, in-depth training. Manufacturer’s instructions must also be followed and reviewed before any equipment is used.

    TowerPlex: The Video


    Gear Up with Gear Experts: The Podcast


    If you haven’t already checked out Gear Up with Gear Experts, our podcast dedicated to at-height, industry, and construction, it is available for download! You can find it on all major podcast listening platforms like Apple Podcasts, Spotify, Google Play Music, + your favorite podcatcher of choice. And, you can head on over to gearexperts.com to follow us on social media, check out our detailed show notes, and sign up for updates.

    Get Social


    Be sure to follow us on social media to keep up with everything GME Supply has going on.

    Facebook | Instagram | YouTube | Twitter | LinkedIn

    We’re Also on Snapchat


    Simply snap or screenshot this image ↓ to follow GME Supply!

  3. Safety Training 101

    Safety LMS Online Training | Safety Training 101 | GME Supply

     

    It’s no secret that at-height work is dangerous and at GME Supply we pride ourselves in helping keep the dedicated men and women in at-height, industry, and construction safe and productive on the job. When talking about safety, a lot of people focus on the equipment. But the equipment is only half of the safety equation. After all, if you don’t know how to properly use the safety equipment you have it might not keep you safe. This week our Gear Experts® are going to break down some key things to keep in mind when selecting training courses for your crew.

     

    Quality


    The quality of the courses you choose will directly affect your training experience, what information and/or techniques you learn, and your ability to continue to practice once the training is over. Here is a list of things to find out about the training company before you invest your hard-earned money in their courses.

    1. Where did the company’s curriculum come from? You want to make sure that their curriculum covers not only the things you need to legally know but also best practices and tip/tricks for self-training and continued education.
    2. How old is the company’s curriculum? Safety training companies aren’t always known for having up-to-date materials. But there are a few companies out there, like our friends at Safety LMS,  who have committed to updating curriculum a minimum of once a year. Safety LMS knows that things can change faster than most people think and that staying up-to-date is the best way to keep crews safe.
    3. Who is teaching the classes? Having an instructor who simply stands in front of you and reads right out of the book doesn’t exactly make for an enjoyable class. Beyond that, someone with no on-the-job experience in the class they are teaching can create a disconnect with students. Finding a training company where the instructors have experience in the industry and who can do more than reading from a book can not only make the class more exciting, but it can give additional insight into the industry and make Q&A sessions easier.

     

    Cost


    Cost is something that no one is immune to. Whether you are the biggest company in the country or a one crew team just trying to get off of the ground, spending money can often times be stressful. Cutting corners in training might save you some money in the short term, but improperly trained staff can lead to severe financial repercussions in the future. Finding a quality course for your employees not only keeps them safe but keeps the business safe too. If an accident happens due to lack of training not only do you lose out on the money from the time it takes to investigate the accident, but you have the potential to lose future jobs, get tied up in lawsuits, and go out of business completely.

     

    Credentials


    The credentials of not only the training company, but the instructors too, is an important part of the training process. Some questions to ask when vetting potential training companies include:

    • Who is responsible for creating the curriculum?
    • Who are the instructors?
    • What credentials do the instructors have?
    • What experience do they have?

    It’s also always good to check with your colleagues and peer groups to see if any of them have attended a training session and what their experience was. Proper training saves lives and ensuring that the instructor is qualified can make all the difference.

    If you’ve got questions about training sessions, or anything training related, click here to contact one of our Gear Experts®.

    Click here to see our full selection of online and in-person training courses.

    **The content of this blog is not intended to replace proper, in-depth training. Manufacturer’s instructions must also be followed and reviewed before any equipment is used.

     

    Safety LMS Online Courses: The Video


     

    Gear Up with Gear Experts: The Podcast


    If you haven’t already checked out Gear Up with Gear Experts, our podcast dedicated to at-height, industry, and construction, it is available for download! You can find it on all major podcast listening platforms like Apple Podcasts, Spotify, Google Play Music, + your favorite podcatcher of choice. And, you can head on over to gearexperts.com to follow us on social media, check out our detailed show notes, and sign up for updates.

     

    Get Social


    Be sure to follow us on social media to keep up with everything GME Supply has going on.

    Facebook | Instagram | YouTube | Twitter | LinkedIn

     

    We’re Also on Snapchat


    Simply snap or screenshot this image ↓ to follow GME Supply!

  4. 3M Fall Protection for Tools Sample Tool Tether Pack

    3M Fall Protection for Tools Sample Pack

    The ISEA/ANSI 121 Dropped Objects Prevention Standard outlines the safety standards and requirements for testing at-height tool tethering equipment in order to increase safety. This doesn't mean that there will be a requirement for tethering. However, in the future, it may be standardized across different industries.

    3M has developed a wide range of excellent tools for drop prevention and we helped select a wide variety to showcase in the 3M Fall Protection for Tools Sample Pack. Buy a Tower Climbing Kit and receive the 3M Fall Protection Sample Pack for FREE for a limited time. The sample kit includes 9 pieces of awesome gear from 3M.

    This kit includes:

    Watch our video outlining the kit and scroll further for descriptions of different drop prevention issues and solutions.

    The Full Video:


    Check out 3M Fall Protection for Tools Sample Pack here ↓

     

    Tool Tethers


    Tool tethers have been around for quite a few years. However, traditionally they were referred to as tool lanyards. The industry has adopted the name tool tethers to prevent confusion between tool drop prevention equipment and shock absorbing lanyards. Tool tethers, like most equipment in the at-height industry, come in a range of shapes and sizes.

    How They Work


    Dropped objects are still a huge cause of injury and death in the United States. Tool tethers are designed to help prevent those casualties and also prevent lost productivity and damaged equipment.

    Tool tethers have a range of connections points and a variety of different weight capacities ranging from 1 to 15 pounds. The weight capacity is based on the weight of the tool.

    If you need a tool tether with a larger capacity click here to contact one of our Gear Experts®.

    Connecting the tool tether to the tool itself can be done in a few different ways. If the tool has a tether connection built-in, then you are good to go. Simply attach the connection point of the tether to the tool and you’re in business. If you find yourself in a situation where the tool does not have a tether point, there are solutions available. Some options include:

    Self-Adhering Tape – This is a tape that has been designed to adhere to a connection point to your tool.

    Tool Collars – These are components that help retrofit a range of tools with a connection point without hindering the ability to use the handle of the tool.

    Tool tethers come in a range of lengths that not only provide easier use when working but also provide added force reduction in the event of a drop. Another option, if you need to be able to adjust the length, is to use a retractable tether. Think of retractable tethers as mini SRLs for your tools. It functions in much the same way.

    **The content of this blog is not intended to replace proper, in-depth training. Manufacturer’s instructions must also be followed and reviewed before any equipment is used.

    Looking for more information about tool tethers? Click here to contact one of our Gear Experts®.

    Click here to see our full selection of Tool Tethers
    Click here to see our full selection of Tools

    Gear Up with Gear Experts Podcast Episode 9 - Tool Tethering

    → Click Here to listen to our Gear Experts discuss tool tethering:

    The Full Video:


    Check out 3M Fall Protection for Tools Sample Pack here ↓

     

    Get Social


    Be sure to follow us on social media to keep up with everything GME Supply has going on.

    Facebook | Instagram | YouTube | Twitter | LinkedIn

    We’re Also on Snapchat


    Simply snap or screenshot this image ↓ to follow GME Supply!

  5. Product Spotlight: Petzl GRILLON PLUS Adjustable Positioning Lanyard

    Petzl Grillon

    Positioning yourself where you need to be will make the job a little bit easier when working at height. Beyond that, having the ability to adjust your positioning on the fly – while still maintaining 100% tie-off increases productivity while still maintaining safety standards. Adjustable positioning can be done with the use of specialty equipment and this week our Gear Experts® are going to break down the Petzl GRILLON PLUS Adjustable Positioning Lanyard.

    The Petzl GRILLON PLUS


     

    The GRILLON PLUS is similar to the traditional GRILLON. One of the major differences that you might notice is that the PLUS doesn’t have an abrasion sleeve. That’s because, instead of having a standard kernmantle rope construction, it’s made out of heavy-duty aramid fiber kernmantle rope. Aramid fiber rope provides superior resistance to abrasion when compared to nearly any rope which removes the need for the abrasion sleeve.

    Features


     

    Rope

    Not only is the rope stronger, thanks to the aramid fiber construction, but it also features sewn terminations at both ends. The ends are then covered in a plastic sheath to help keep the connector in position while simultaneously protecting the ends of the rope from abrasion.

    Adjustability

    The adjustability of the GRILLON PLUS is all thanks to the aluminum device that comes attached to the rope. This device is well known for its smoothness when allowing a rope to pass through it.

    Versatility


     

    The GRILLON PLUS is a versatile piece of equipment. It comes in two different lengths – 2 and 3-meter versions. And, if the rope ever needs to be replaced due to damage or any other reason, you can easily swap it out with a GRILLON PLUS Replacement Lanyard. Lastly, it can also be used in two different configurations (or, as we call them, modes). Those modes are double and single mode.

    Single Mode

    Single Mode is used when an anchor is directly above you. This mode will comfortably distribute the load between the belt and the leg loops. Your position can be adjusted by operating the handle while holding the free end of the lanyard.

    Double Mode

    When using the device in double mode, the lanyard is fed through the anchor or structure and the end is secured to one of your hip D-rings while the device is attached to your other D-ring. The double mode technique does a better job at distributing the load to the belt while allowing you to pivot and swing to achieve your desired position.

    Certifications


     

    This lanyard is fancy – no doubt about it. Between the top-of-the-line features and versatility, it’s a device that can come in handy for anyone who needs the ability to position while working at-height. But, perhaps the most important feature is the standards this device meets. It meets ANSI Z359.3, CSA Z259.11, CE EN 385, and CE EN 12841 Type C.

    If you’ve got any questions about the Petzl GRILLON PLUS Adjustable Positioning Lanyard, or anything else related to at-height, industry, and construction, click here to contact one of our Gear Experts®.

    Click here to see the Petzl GRILLON PLUS

    Click here to see our full selection of Petzl gear

    **The content of this blog is not intended to replace proper, in-depth training. Manufacturer’s instructions must also be followed and reviewed before any equipment is used.

    Petzl GRILLON PLUS Adjustable Positioning Lanyard: The Video


     

    Gear Up with Gear Experts: The Podcast


     

    If you haven’t already checked out Gear Up with Gear Experts, our podcast dedicated to at-height, industry, and construction, it is available for download! You can find it on all major podcast listening platforms like Apple Podcasts, Spotify, Google Play Music, + your favorite podcatcher of choice. And, you can head on over to gearexperts.com to follow us on social media, check out our detailed show notes, and sign up for updates.

    Get Social


     

    Be sure to follow us on social media to keep up with everything GME Supply has going on.

    Facebook | Instagram | YouTube | Twitter | LinkedIn

    We’re Also on Snapchat


     

    Simply snap or screenshot this image ↓ to follow GME Supply!

5 Item(s)