Hours: 7am-7pm CST M-F 8am-1pm CST Sat

Welcome, Guest!

ASK A GEAR EXPERT(800) 940-6762

0

7256000 DBI Sala Evolution Portable Pylon Anchor

Part Number: 7256000

Availability: In stock

Quick Overview

725600 DBI Sala Evolution Portable Pylon Anchor. Designed to be used on a variety of surfaces including dirt, sand, packed soil, or frozen ground. System easy to relocate for rapid job site placement and maximum versatility. Unlike traditional pylon or screw in anchors, the Portable Pylon Anchor does not require special equipment to install, reducing job site expense.

7256000 DBI Sala Evolution Portable Pylon Anchor

Part Number: 7256000

Availability: In stock

Quick Overview

725600 DBI Sala Evolution Portable Pylon Anchor. Designed to be used on a variety of surfaces including dirt, sand, packed soil, or frozen ground. System easy to relocate for rapid job site placement and maximum versatility. Unlike traditional pylon or screw in anchors, the Portable Pylon Anchor does not require special equipment to install, reducing job site expense.
FREE SHIPPING!
$4,631.99

Evolution Portable Pylon Anchor, DBI Sala Part # 7256000

  • Designed to be used on a variety of surfaces including dirt, sand, packed soil, or frozen ground.
  • Included fork lift pockets and lifting eye make the system easy to relocate for rapid job site placement and maximum versatility.
  • Unlike traditional pylon or screw in anchors, the Portable Pylon Anchor does not require special equipment to install, reducing job site expense.
  • Can be broken down into manageable pieces for movement by hand when needed, dramatically improving job site flexibility.
  • Durable steel construction with powder coated finish for long lasting performance.
  • Expandable design allows for attachment of additional weight racks to support other applications upon receipt of approval from Capital Safety Engineering.


Escape or Support
The new Evolution Portable Pylon Anchor was designed to support the bottom end of the sloped guide cable supporting a Rollgliss Emergency Escape Sloped Descent Device (115’ or 200’, high or low speed models). Although originally developed for the Oil and Gas industry for escape from drilling and service rigs, it can also be used in a similar manner to support the bottom end of sloped escape lines from silos, cranes or buildings in an emergency or for training purposes. The Portable Pylon Anchor can be used to secure the bottom end of the guy cable used with a climb assist system when worker mobility and fall protection are needed.

Flexible and Versatile
The Evolution Portable Pylon Anchor can be used on a variety of surfaces from dirt, sand, packed soil, or on frozen ground. The anchor eliminates the need for pylon, screw in, or stake-in anchors. Traditional screw-in style Pylon anchors require heavy equipment for installation. Advanced job site planning is necessary, and the anchors are expensive to install. Alternately, blocks of concrete or other weighted objects are used as an end anchor. These home-grown systems may not be approved or appropriate for this type of application and likely are not a certified system.

Quick & Easy Installation
The Portable Pylon Anchor is easily and quickly installed by two workers by simply placing it in the desired location, adding the required weights, and hammering in the rear stakes if required. It can be easily moved with a forklift, a crane, or can be taken apart by hand, as it breaks into easily transportable components. Although the anchor is designed to dig deeper into the ground to support higher loading, it is critical that the manufacturer’s instructions are followed for the safe installation and use of this product. Other applications are possible pending approval from Capital Safety Engineering.

Tell us what you think about this item!

Product Description

Evolution Portable Pylon Anchor, DBI Sala Part # 7256000

  • Designed to be used on a variety of surfaces including dirt, sand, packed soil, or frozen ground.
  • Included fork lift pockets and lifting eye make the system easy to relocate for rapid job site placement and maximum versatility.
  • Unlike traditional pylon or screw in anchors, the Portable Pylon Anchor does not require special equipment to install, reducing job site expense.
  • Can be broken down into manageable pieces for movement by hand when needed, dramatically improving job site flexibility.
  • Durable steel construction with powder coated finish for long lasting performance.
  • Expandable design allows for attachment of additional weight racks to support other applications upon receipt of approval from Capital Safety Engineering.


Escape or Support
The new Evolution Portable Pylon Anchor was designed to support the bottom end of the sloped guide cable supporting a Rollgliss Emergency Escape Sloped Descent Device (115’ or 200’, high or low speed models). Although originally developed for the Oil and Gas industry for escape from drilling and service rigs, it can also be used in a similar manner to support the bottom end of sloped escape lines from silos, cranes or buildings in an emergency or for training purposes. The Portable Pylon Anchor can be used to secure the bottom end of the guy cable used with a climb assist system when worker mobility and fall protection are needed.

Flexible and Versatile
The Evolution Portable Pylon Anchor can be used on a variety of surfaces from dirt, sand, packed soil, or on frozen ground. The anchor eliminates the need for pylon, screw in, or stake-in anchors. Traditional screw-in style Pylon anchors require heavy equipment for installation. Advanced job site planning is necessary, and the anchors are expensive to install. Alternately, blocks of concrete or other weighted objects are used as an end anchor. These home-grown systems may not be approved or appropriate for this type of application and likely are not a certified system.

Quick & Easy Installation
The Portable Pylon Anchor is easily and quickly installed by two workers by simply placing it in the desired location, adding the required weights, and hammering in the rear stakes if required. It can be easily moved with a forklift, a crane, or can be taken apart by hand, as it breaks into easily transportable components. Although the anchor is designed to dig deeper into the ground to support higher loading, it is critical that the manufacturer’s instructions are followed for the safe installation and use of this product. Other applications are possible pending approval from Capital Safety Engineering.

Specifications

Reviews

Tell us what you think about this item!

Questions