Hours: 7am-7pm CST M-F 8am-1pm CST Sat

Welcome, Guest!

ASK A GEAR EXPERT(800) 940-6762

0

Protecta 2190053 Reusable Concrete Anchor

Part Number: 2190053

Availability: In stock

Quick Overview

2190053 Protecta Reusable Concrete Anchor

Protecta 2190053 Reusable Concrete Anchor

Part Number: 2190053

Availability: In stock

Quick Overview

2190053 Protecta Reusable Concrete Anchor
FREE SHIPPING OVER $199!
$115.28

Protecta 2190053 Reusable Concrete Anchor

The 2190053 Protecta Reusable Concrete Anchor provides a portable, durable and safe concrete anchor for vertical wall or overhead ceiling applications. It is extremely easy-to-use and is 5,000 lb. fall arrest rated for added safety and flexibility.

  • Fast, Easy and Safe Installation
  • Installation is simple and efficient, taking just seconds utilizing standard concrete tools.
    • Drill a 3-1/2” (8.89cm) -to 4” (10.16cm) deep hole with rotary hammer and 3/4” (19.05mm) drill bit.
    • Pull up on the trigger until it’s fully retracted.
    • Insert anchor into hole until release plug seats against concrete surface.
    • Pull on the D-ring to set the anchor in place  and connect your personal fall arrest system.
    • Release of the anchor is just as fast. Simply pull up on the trigger and you’re ready to move to the next location. Refer to instruction manual for complete details. 
  • Anchorage Requirements
    • The concrete must have a minimum compressive strength of 3000 psi (2,685 kPa).
    • The concrete base material must be at least 5” (12.7cm) thick and the mounting hole location from the edge is dependent upon the concrete thickness and width
Tell us what you think about this item!

Product Description

Protecta 2190053 Reusable Concrete Anchor

The 2190053 Protecta Reusable Concrete Anchor provides a portable, durable and safe concrete anchor for vertical wall or overhead ceiling applications. It is extremely easy-to-use and is 5,000 lb. fall arrest rated for added safety and flexibility.

  • Fast, Easy and Safe Installation
  • Installation is simple and efficient, taking just seconds utilizing standard concrete tools.
    • Drill a 3-1/2” (8.89cm) -to 4” (10.16cm) deep hole with rotary hammer and 3/4” (19.05mm) drill bit.
    • Pull up on the trigger until it’s fully retracted.
    • Insert anchor into hole until release plug seats against concrete surface.
    • Pull on the D-ring to set the anchor in place  and connect your personal fall arrest system.
    • Release of the anchor is just as fast. Simply pull up on the trigger and you’re ready to move to the next location. Refer to instruction manual for complete details. 
  • Anchorage Requirements
    • The concrete must have a minimum compressive strength of 3000 psi (2,685 kPa).
    • The concrete base material must be at least 5” (12.7cm) thick and the mounting hole location from the edge is dependent upon the concrete thickness and width

Specifications

Reviews

Tell us what you think about this item!

Questions